Detailed Description Commodities parameters:
Voltage: AC220V 50Hz
Frequency: 400W
Rotating Speed: 3000/min
Packing Size: 205×245×295mm
Weight: 16kg

1. Adopt imported actuator: lower noise and longer service life;
2. Microcomputer control, safe and reliable operation;
3. After stirring, it can produce impression material without bubbles, good elasticity, not easy to deformation, modulus more clearly;
4. Time setting range is between 1-24 seconds by the user, according to different impression material characteristics to choose;
5. According to user needs, there are three computer memory setting ( default setting is 8 seconds” scoop of powder”,10seconds two scoop of powder,”12 seconds” three scoop of powder” );
6. Internal temperature can be controlled, which make it possible that work continuously for a long time without affecting the impression material production;

The following items should be noted closely to assure smooth operation, which is helpful to free from the accident of personal injure:

1. In order to extend the setting time of alginate impression material while in mixing, please use cool water(10℃~20℃). If desires to use the fast-setting alginate it should specifically watch the setting time.
2. In order to avoid any malfunction, if the mixing bowl has not been closely tight with cap, the machine shall not be stared. If only water is contained, the mixer shall not be started.
3. The limited weight of mixing on each capacity is 25g~100g, never exceeds 100g.
4. Since the possible leakage might be occurred on mixing bowl while it is running, so it only can be used in the tightened state.
5. If the small hole at the enter of mixing bowl cap is jammed, which would cause difficulty on tightening. The jam of small hole shall be removed immediately if it was jammed.
6. If there is any abnormal noise or vibration while in the mixing, the STOP button shall be pressed immediately. Then lift the cover to check if any disorder condition happened.
7. The mixing bowl is the consumed product of accessories, if it can not be covered tightly due to transformation, please change a new one.
8. If the machine is to be sent for repair or delivered to a far place, please fasten the motor by two fixing bolts attached for handing. Otherwise, it will cause a more serious problem.

The warranty for this product is one-year from the day you purchase this product. During this period, any problem under normal usage circumstance and obey the operation manual,our company will be responsible for giving free maintain.
1. Provide free customer guidance by experts
2. Provide free parts during warranty
3. Provide free solutions and technical support during warranty
4. Promise 24 hours Q&A system, and provide solution within 3 days.

Related Articles